[Linux] Problemas con modem

["Hector Bautista" <hbautista en gmx net>]

Hola, he instalado Redhat 8 en mi pc, y todo bien, bonito y elegante (a
primera vista) pero me surgen unas dudas, no puedo echar a andar el
modem que tengo según winxp es un Intel(R) 537 Data Fax V.90 Modem, y
linux lo reconoce de otra forma.

El detalle que redhat trae un detector o navegador de hardware y en ese
punto si me lo detecta, pero si quiero conectarme a internet, me dice
que no lo detecta, y si desde una terminal ejecuto wvdialconf me dice
que tampoco lo encuentra...

De todos modos, anticipadamente les doy mi sincero agradecimiento si
pudiesen orientarme de cómo va todo..

Anexo algunos archivos de capturas de lo que hice en Redhat y una liga
de donde supuestamente estoy bajando unos controladores del sitio de
intel.

http://www.intel.com/design/modems/support/drivers_linux.htm

Atte.
Héctor Bautista

Linux version 2.4.18-14 (bhcompile en astest test redhat com) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 12:13:11 EDT 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ec000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
 BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
 BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/ hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 1533.257 MHz processor.
Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized
Console: colour VGA+ 80x25
Calibrating delay loop... 3038.00 BogoMIPS
Memory: 253024k/262080k available (1311k kernel code, 6624k reserved, 987k data, 212k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 4096 (order: 3, 32768 bytes)
ramfs: mounted with options: <defaults>
ramfs: max_pages=31883 max_file_pages=0 max_inodes=0 max_dentries=31883
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0383f9ff c1cbf9ff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0383f9ff c1cbf9ff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU:             Common caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: AMD Athlon(tm) XP 1800+  stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch en atnf csiro au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
Applying VIA southbridge workaround.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
speakup:  initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 480 slots per queue, batch=120
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: SAMSUNG SV3064D, ATA DISK drive
hdb: CREATIVE CD5220E, ATAPI CD/DVD-ROM drive
hdc: HL-DT-ST GCE-8320B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 59794560 sectors (30615 MB) w/434KiB Cache, CHS=3722/255/63, UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 127k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 212k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 12:23:37 Sep  4 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 9 for device 00:07.3
PCI: Sharing IRQ 9 with 00:07.2
PCI: Sharing IRQ 9 with 00:0f.0
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 9 for device 00:07.2
PCI: Sharing IRQ 9 with 00:07.3
PCI: Sharing IRQ 9 with 00:0f.0
usb-uhci.c: USB UHCI at I/O 0xcc00, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech en suse cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
XD: Loaded as a module.
Trying to free nonexistent resource <00000320-00000323>
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,8), internal journal
Adding Swap: 1052216k swap-space (priority -1)
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,10), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,12), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,9), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hdb: ATAPI 52X CD-ROM drive, 120kB Cache
Uniform CD-ROM driver Revision: 3.12
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: HL-DT-ST  Model: CD-RW GCE-8320B   Rev: 1.03
  Type:   CD-ROM                             ANSI SCSI revision: 02
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: Printer, HEWLETT-PACKARD DESKJET 930C
parport_pc: Via 686A parallel port: io=0x378
ohci1394: pci_module_init failed
ip_tables: (C) 2000-2002 Netfilter core team
via-rhine.c:v1.10-LK1.1.14  May-3-2002  Written by Donald Becker
  http://www.scyld.com/network/via-rhine.html
PCI: Found IRQ 9 for device 00:0f.0
PCI: Sharing IRQ 9 with 00:07.3
PCI: Sharing IRQ 9 with 00:07.2
divert: allocating divert_blk for eth0
eth0: VIA VT86C100A Rhine at 0xc400, 00:40:33:a8:60:3c, IRQ 9.
eth0: MII PHY found at address 1, status 0x7809 advertising 05e1 Link 0000.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: Printer, HEWLETT-PACKARD DESKJET 930C
parport_pc: Via 686A parallel port: io=0x378
lp0: using parport0 (polling).
lp0: console ready
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Detected Via Apollo Pro KT133 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] AGP 0.99 on VIA Apollo KT133 @ 0xe0000000 64MB
[drm] Initialized radeon 1.1.1 20010405 on minor 0
Via 686a audio driver 1.9.1
PCI: Found IRQ 10 for device 00:07.5
PCI: Sharing IRQ 10 with 00:0a.0
ac97_codec: AC97 Audio codec, id: 0x414c:0x4710 (ALC200/200P)
via82cxxx: board #1 at 0xDC00, IRQ 10
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
ohci1394: pci_module_init failed

Attachment: pantallazo-DeviceList.py.png
Description: PNG image

Attachment: pantallazo-Internet-druid.png
Description: PNG image

Scanning your serial ports for a modem.



Sorry, no modem was detected!  Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wvdial/

If you still have problems, send mail to wvdial-list en lists nit ca.

ÿþIntel(R) 537 Data Fax V.90 Modem



ATQ0V1E0 - OK

AT+GMM - Intel(R) 537 Data Fax V.90 Modem

       H.324 video-ready rev. 1.0

AT+FCLASS=? - 0,1

AT#CLS=? - COMANDO NO PERMITIDO

AT+GCI? - +GCI: B5

AT+GCI=? - +GCI: (B5,61,35,14,25,27,85,88,98,A9,BC,A5,31,3C,82,52,57,58,68,A0,AE,42,0A,A6,2D,46,59,69,7B,B4,0F,3D,8B,84,00,B8,09,6C,26,50,9C,7E,07,16,73,26,53,89,54,9F,8A,2E)

ATI1 - Intel(R) 537 Data Fax V.90 Modem

ATI2 - Intel Corporation

ATI3 - 537

ATI4 - 537 Release 4.19  - Mar 13 2002 - 22:07:15

ATI5 - CP Code Location: Host PC

       DSP Code Location: Host PC

       Host Interface: PCI

ATI6 - DSP Software Version : 1.2.2.126

ATI7 - OK