[Previo por Fecha] [Siguiente por Fecha] [Previo por Hilo] [Siguiente por Hilo]

[Hilos de Discusión] [Fecha] [Tema] [Autor]

Re: [Ayuda] Ayuda con Linux como gateway




lo lei muy rapido pero creo 
que lo unico que te falla
es 

iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE

ahora puedes intentar con el turorial
de www.upn.mx/~max


> 
> Windows XP 10.1.1.50
> Laptop     10.1.1.47
> Linux	     10.1.1.21
> 
> Al Linux tambien le puse otra tarjeta con la ip 10.0.0.1
> 
> Ya pude (después de muchos dias) hacer que el linux se conectara al
> infinitud, pero tratando de poner al alinux como gateway/firewall no he
> podido.
> Segui las instrucciones de la siguiente liga que me parecio buena
> 
> http://www.yolinux.com/TUTORIALS/LinuxTutorialNetworkGateway.html
> 
> y segui al pie de la letra el ejemplo 2.
> 
> No he podido hacer que funcione.....    :(
> 
> Alguna recomendación ?
> 
> Les anexo el script que corre cuando arranca,
> Un route -n
> ifconfig
> e iptables -L
> 
> Muchas Gracias.
> 
> ARMZ
> 
> 
> 
> 
> 
> 
> #comando que se ejecutan en el arranque
> iptables --flush
> iptables --table nat --flush
> iptables --delete-chain
> iptables --table nat --delete-chain
> 
> iptables --table nat --append POSTROUTING --out-interface eth0 -j
> MASQUERADE
> iptables --append FORWARD --in-interface eth1 -j ACCEPT
> echo 1 > /proc/sys/net/ipv4/ip_forward
> 
> 
> [root@LinuxTron init.d]#route -n
> Kernel IP routing table
> Destination     Gateway         Genmask         Flags Metric Ref    Use
> Iface
> 148.223.26.77   0.0.0.0         255.255.255.255 UH    0      0        0
> ppp0
> 200.67.48.198   127.0.0.1       255.255.255.255 UGH   0      0        0
> lo
> 10.0.0.0        10.0.0.1        255.255.255.0   UG    0      0        0
> eth0
> 10.0.0.0        0.0.0.0         255.255.255.0   U     0      0        0
> eth0
> 10.1.1.0        10.1.1.21       255.255.255.0   UG    0      0        0
> eth1
> 10.1.1.0        0.0.0.0         255.255.255.0   U     0      0        0
> eth1
> 127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0
> lo
> 0.0.0.0         148.223.26.77   0.0.0.0         UG    0      0        0
> ppp0
> [root@LinuxTron init.d]#
> 
> 
> [root@LinuxTron init.d]# ifconfig
> eth0      Link encap:Ethernet  HWaddr 00:80:AD:73:27:E5
>           inet addr:10.0.0.1  Bcast:10.0.0.255  Mask:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:59 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:135 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:100
>           RX bytes:3955 (3.8 Kb)  TX bytes:8826 (8.6 Kb)
>           Interrupt:11 Base address:0xc800
> 
> eth1      Link encap:Ethernet  HWaddr 00:80:AD:71:39:2C
>           inet addr:10.1.1.21  Bcast:10.1.1.255  Mask:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:91 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:50 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:1 txqueuelen:100
>           RX bytes:9454 (9.2 Kb)  TX bytes:6709 (6.5 Kb)
>           Interrupt:10 Base address:0xcc00
> 
> lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           UP LOOPBACK RUNNING  MTU:16436  Metric:1
>           RX packets:10 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:700 (700.0 b)  TX bytes:700 (700.0 b)
> 
> ppp0      Link encap:Point-to-Point Protocol
>           inet addr:200.67.48.198  P-t-P:148.223.26.77
> Mask:255.255.255.255
>           UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1492  Metric:1
>           RX packets:19 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:75 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:3
>           RX bytes:1060 (1.0 Kb)  TX bytes:4616 (4.5 Kb)
> 
> [root@LinuxTron init.d]#
> 
> 
> 
> [root@LinuxTron init.d]# iptables -L
> Chain INPUT (policy ACCEPT)
> target     prot opt source               destination
> 
> Chain FORWARD (policy ACCEPT)
> target     prot opt source               destination
> ACCEPT     all  --  anywhere             anywhere
> 
> Chain OUTPUT (policy ACCEPT)
> target     prot opt source               destination
> [root@LinuxTron init.d]#
> 
> 
> _______________________________________________

> Ayuda mailing list
> Ayuda en linux org mx
> Para salir de la lista:
> http://mail.linux.org.mx/mailman/listinfo/ayuda/
> 


-------------------------------------------------
Obtén tu correo en www.correo.unam.mx
UNAMonos Comunicándonos


_______________________________________________
Ayuda mailing list
Ayuda en linux org mx
Para salir de la lista: http://mail.linux.org.mx/mailman/listinfo/ayuda/



[Hilos de Discusión] [Fecha] [Tema] [Autor]