[Previo por Fecha] [Siguiente por Fecha] [Previo por Hilo] [Siguiente por Hilo]
[Hilos de Discusión] [Fecha] [Tema] [Autor]Buenos dias, Ojala y me puedan ayudar en este atoron que traigo. Contrate infinitud para la casa, y me gusta y estoy empezando esto del linux, asi que tengo una computadora con RED HAT 8.0, y tambien una con XP que usa mi esposa y mi hijo. Tengo una red local para cuando llevo mi laptop, asi que la red local tiene las siguientes direcciones Windows XP 10.1.1.50 Laptop 10.1.1.47 Linux 10.1.1.21 Al Linux tambien le puse otra tarjeta con la ip 10.0.0.1 Ya pude (después de muchos dias) hacer que el linux se conectara al infinitud, pero tratando de poner al alinux como gateway/firewall no he podido. Segui las instrucciones de la siguiente liga que me parecio buena http://www.yolinux.com/TUTORIALS/LinuxTutorialNetworkGateway.html y segui al pie de la letra el ejemplo 2. No he podido hacer que funcione..... :( Alguna recomendación ? Les anexo el script que corre cuando arranca, Un route -n ifconfig e iptables -L Muchas Gracias. ARMZ #comando que se ejecutan en el arranque iptables --flush iptables --table nat --flush iptables --delete-chain iptables --table nat --delete-chain iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE iptables --append FORWARD --in-interface eth1 -j ACCEPT echo 1 > /proc/sys/net/ipv4/ip_forward [root@LinuxTron init.d]#route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 148.223.26.77 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 200.67.48.198 127.0.0.1 255.255.255.255 UGH 0 0 0 lo 10.0.0.0 10.0.0.1 255.255.255.0 UG 0 0 0 eth0 10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.1.1.0 10.1.1.21 255.255.255.0 UG 0 0 0 eth1 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 148.223.26.77 0.0.0.0 UG 0 0 0 ppp0 [root@LinuxTron init.d]# [root@LinuxTron init.d]# ifconfig eth0 Link encap:Ethernet HWaddr 00:80:AD:73:27:E5 inet addr:10.0.0.1 Bcast:10.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:59 errors:0 dropped:0 overruns:0 frame:0 TX packets:135 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:3955 (3.8 Kb) TX bytes:8826 (8.6 Kb) Interrupt:11 Base address:0xc800 eth1 Link encap:Ethernet HWaddr 00:80:AD:71:39:2C inet addr:10.1.1.21 Bcast:10.1.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:91 errors:0 dropped:0 overruns:0 frame:0 TX packets:50 errors:0 dropped:0 overruns:0 carrier:0 collisions:1 txqueuelen:100 RX bytes:9454 (9.2 Kb) TX bytes:6709 (6.5 Kb) Interrupt:10 Base address:0xcc00 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:10 errors:0 dropped:0 overruns:0 frame:0 TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:700 (700.0 b) TX bytes:700 (700.0 b) ppp0 Link encap:Point-to-Point Protocol inet addr:200.67.48.198 P-t-P:148.223.26.77 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:19 errors:0 dropped:0 overruns:0 frame:0 TX packets:75 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:1060 (1.0 Kb) TX bytes:4616 (4.5 Kb) [root@LinuxTron init.d]# [root@LinuxTron init.d]# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination [root@LinuxTron init.d]# _______________________________________________ Ayuda mailing list Ayuda en linux org mx Para salir de la lista: http://mail.linux.org.mx/mailman/listinfo/ayuda/